Take the JS115-6 of Xi'an Simo JS/JR series three-phase asynchronous motors, which represents a squirrel-cage rotor asynchronous motor, as an example. It means the 11th frame, the core length is No. 5, and it has 6 poles.
The JR115-6 represents a wound-rotor asynchronous motor, the 11th frame, the core length is No. 5, and it has 6 poles.
The JR series motors are divided into two types: those with brush lifting and short-circuit devices and those without brush lifting and short-circuit devices.
The J series medium-sized motors can drive various different machines, such as ventilators, compressors, water pumps, crushers, ball mills, machine tools for cutting, transportation machinery, and other equipment. They can be used as prime movers in coal mines, the machinery industry, power plants, and various industrial and mining enterprises.
The JS series are squirrel-cage rotor three-phase asynchronous motors.
The JR series are wound-rotor three-phase asynchronous motors.
The JS series motors comply with the provisions of the ministry-issued standard JB563-64 technical conditions.
The JR series motors comply with the provisions of the ministry-issued standard JB564-64 technical conditions.
The Xi'an Simo JS/JR series three-phase asynchronous motors are of the protective type. According to user needs, they can also be made into the duct ventilation type.
The protective motors should be installed indoors at an altitude not exceeding 1KM, with the ambient air temperature not higher than +40℃ and not lower than 0℃, in clean air without corrosive gases such as acids and alkalis. The motors are not allowed to work in an environment containing explosive gases or a large amount of dust.
When the ambient air temperature around the motor exceeds the above regulations or the air is not clean, the duct ventilation mode should be adopted. At this time, the temperature of the cooling air entering both ends of the motor should be between 0℃ and 40℃, and it should be ensured that the air pressure inside the duct and the motor is higher than the ambient air pressure. If necessary, blowers, dust filters, etc. should be installed.
The Xi'an Simo JS series squirrel-cage motors are allowed to start directly at full voltage. The ratios of the initial starting torque and the initial starting current values to the rated values are shown in Table 3 respectively. If the user's power grid does not allow direct starting at full voltage, starting with reduced voltage can be adopted. However, at this time, the starting torque will decrease in a square relationship with the starting voltage.
The JR series motors must be started by pre-connecting a starting rheostat in the rotor circuit. It is not allowed to directly short-circuit the rotor winding for starting.
Xi'an Simo Motor (Group) Co., Ltd. is a large domestic enterprise specialized in manufacturing large and medium-sized, high and low-voltage, AC and DC motors. It is a systematic power system provider integrating motor design and manufacturing, electrical control, mechanical processing, mold, casting, transportation, and other automation and complete projects. Its production and sales scale ranks among the top in the national motor industry, maintaining a high-speed growth trend for 7 consecutive years. It was shortlisted in the top 500 of China's machinery industry in 2004 and ranked 58th in China's electrical industry in 2005. In 1995, it took the lead in obtaining the ISO9001-1994 quality system certification in the industry, and in August 2005, it passed the ISO9001-2000 quality system certification of the China Quality Certification Center (CQC). In May 2006, it passed the ISO14000 environmental management system and OHSAS18000 occupational health and safety management system certifications, and at the same time passed the European "CE", American "UL", and national mandatory "CCC" certifications. It is a quality and credit AAA-level enterprise. Its leading products have successively won honorary titles such as "Ministry/Provincial/Municipal Famous Brand Products", "Xi'an Inspection-free Products", and "China Glory Famous Brand Products".
In order to improve the quality of various electromechanical products, strengthen pre-sales and after-sales services, and make customers feel at ease and satisfied, Simo Motor resolutely implements the "Quality Assurance Statement" of eight scientific research and design institutes in the machine tool industry of the Ministry of Machinery Industry, conscientiously implements all the clauses in the statement, and strictly follows the rules and regulations of the ISO9001:2000 quality management system to ensure:
- Seriously implement relevant national standards, and strictly manufacture and inspect the products according to the standards or contract technical requirements. Unqualified products will not leave the factory.
- After the final assembly and on-line commissioning of various finished products such as product measurement bases, the assembly personnel conduct a 72-hour running test before delivery. Strictly conduct running-in tests and reliability tests according to relevant standards to improve the reliability of new products and eliminate early failures.
- Under normal sales conditions, the above-mentioned finished products are delivered strictly on schedule. Functional components are guaranteed to be supplied within three months, and can be supplied in advance in special cases. In case of delay, compensation will be implemented according to the "1997 New Measures for Quality Improvement".
- When customers find quality problems during the use of products, a reply will be made within 24 hours after receiving the customer's notice. For on-site services, start within 48 hours and ensure that maintenance personnel do not withdraw until the fault is eliminated.
- Complete technical documents are provided when the product leaves the factory. All product quality problems are covered by three guarantees (repair, replacement, return). If the product still does not meet the factory requirements after repair, the product will be returned or replaced.
- Simo Motor products are guaranteed for lifetime maintenance at cost after being sold.
- Before placing an order, please refer to the product catalog of Simo Motor to clarify the technical data such as the model specifications of the required products. If there are differences between the required variety and specifications and those in the catalog, please contact our factory. If there are special requirements, please put forward specific requirements in advance. After mutual negotiation and agreement, a contract or technical agreement shall be signed.
- When placing an order, please indicate the Simo motor model, power, voltage, speed, duty cycle, structural installation type, excitation mode, excitation voltage, number of shaft outlets, position of the terminal box, direction of rotation, as well as the names and quantities of the required accessories and spare parts.
- If it is necessary to be matched for export and there are requirements for the wet tropical area, please indicate it in the contract.
简体中文
